Information Pets

The 10 Most Unanswered Questions about Cars

How To Jump Start A Car Because you do not know when your car battery will fail to work, you should be well equipped with knowledge on how to jump start your car safely. The process of jump starting a car is very easy, but if you do not know how to do it, you are advised to look for a professional who will help you because it can sometimes be risky. Before you are ready to jump start your car, you must ensure that you have a jumper cables. The following procedures are to help you in jump starting your car safely. You should be able to check the location of your battery, or you can check the manual of the car if you are not sure where it is. Place your car next to the car providing the jump. The positioning of the car providing the jump next to your car will help in ensuring that the jumper cables reach your car battery without any problem. Ensure that the jumper cables reach both the car’s battery by placing the cars so closely. Switch off the car providing the jump and note that the hoods of the both cars should remain opened. Onto the battery of the car providing the jump, clamp one end of the jumper cables. There are two clamps of a jumper cable; one part is ideated red to stand for positive and black to stand for negative. The connection of the clamps to the post on the batteries should be made according to the colors, that is the black clamp to the black post on the batteries and the red clamp to the red post indicated on the batteries. The connection of the clamps according to the colors should be made in both the car that is providing the jump and your car and also avoid so much the contact between the two different clamps to avoid dangerous electrical spark.
Getting To The Point – Automobiles
The connection of the black clamp to the engine, reduces the spark produces around the battery. After all these procedures, you can now start the engine of the car giving you the jump and leave it to run for about ten minutes to help in the charging the dead battery. You should observe keenly whether your car will start by turning the key in your ignition.
A Quick History of Services
There is a way you should remove the clamps from both batteries, that is, remove the black clamps and then followed by the red clamp after ensuring that your car engine can start. The last one, you should give your car to a mechanic after jump starting it to ensure that there is no additional problem engage in your car.